VMT

MSS is the software we build our systems on, developed in house since the beginning. Robot vision and inspection, 2D and 3D, classical algorithms and deep learning, all on one platform with one interface. Your team learns one system instead of five, and can retrain it during production without stopping the line. Every VMT system ships with it.

One platform, every application

Bin picking, bead inspection, measurement, code reading. Same software, same interface, same training. Adding a system later means extending what your team already knows.

No code

Inspection tasks and control plans are configured and retrained through the interface. No scripting, no programming, no vision engineer on staff.

‍

Teach while you produce

Retrain directly from the measurement log during automatic operation. No downtime, no cycle time lost, and every change is revertible.

‍

How it works

Control plans instead of code

A control plan is a chain of inspection tasks with a defined data flow. You build it from tasks in the inventory, connect them in the task graph, and wire the results to your PLC in the signal editor. Bit-based and packet-based communication is configured, not programmed.

Parallel execution

Several tasks run at the same time, which saves cycle time, and several systems can share one industrial PC. One sensor can serve multiple tasks in the same cell, so a single MSS system covers what would otherwise take two vision systems and two PCs.

Virtual commissioning

MSS sets systems up from CAD data before the cell is built. Depending on the application, the system arrives partly or almost fully configured, which moves the setup work out of your commissioning window and into ours.

How it works

The toolbox

Robot vision

A mature set of tools for position correction, part localization, bin picking and gripping pose selection, developed against real production cases rather than laboratory conditions.

Inspection and measurement

A wide range of 2D and 3D functions for presence, completeness, position, code reading and dimensional measurement. The same tools we use in turn-key projects are available in every MSS system.

Deep learning

Classification, object detection, segmentation and anomaly detection run natively in MSS. They are additional tools in the same toolbox, used where classical algorithms reach their limit, and trained and retrained through the same interface as everything else.

The toolbox

Operating, data and integration

Operation and optimization

Application-specific control panels show the operator only what is needed. Functions can be hidden or locked per user level, with Active Directory connection. Optimization runs online from the measurement log during production, or offline: export a measurement with one click, work on it in the office, or send it to us.

Sensors and interfaces

2D cameras, 3D sensors and laser triangulation from multiple manufacturers, with new devices integrated as they appear. Profinet, Profibus, EtherNet/IP, EtherCAT, Modbus, Interbus, DeviceNet, TCP/IP and MQTT are all supported, so there is no integration hurdle on the network side.

Data out and traceability

All measurement and system data can be sent to your MES or broker via MQTT or any other interface, so the vision system feeds your plant analytics instead of sitting in its own silo. Statistics with trend monitoring and automatic alerts, full I/O history per measurement, and a tamper-proof audit trail of every configuration change.

Operating, data and integration

VMT MSS

One platform, every application

No code

Teach while you produce

How it works

The toolbox

Operating, data and integration

Our team will be in touch as soon as possible.