VMT

A flat steel blank becomes a door outer panel in a fraction of a second – under thousands of tons of pressure. What goes wrong in the press shop follows the part through the entire production. That is why quality starts here.

High cycle times, extreme forces, and minimal tolerances demand reliable inspection directly within the press process to detect deviations at the earliest stage possible.

Vision systems support stable production workflows by ensuring part quality, monitoring critical process parameters, and reducing costly downstream defects throughout the entire production line.

Decades of Dedication

Pioneering progress through decades of experience.

Geometry measurement after laser cutting

Laser-cut blanks are measured directly after processing before entering the press line.
Inline measurement without production stop, direct CAD referencing, trend analysis for early detection of cutting deviations.
Contour, hole positions, and dimensional accuracy are checked against CAD specification.
Technology: Inspection / BK

LEARN MORE

Blank destacking

Coils are cut into blanks and delivered in stacks. A robot removes individual blanks from the stack.
Reliable detection on reflective, oiled surfaces, high process speed, integrated empty stack monitoring.
Detection of blank position and orientation on the stack, identification of double blanks caused by oil adhesion. Empty stack detection triggers an automatic stop before the robot reaches an empty carrier.
Technology: 2DLE, MSS Inspect

LEARN MORE

Optical blank centering

Before the first press stroke, the exact blank position is determined so the robot places it precisely into the press.
High-precision position measurement, direct robot correction, stable performance under oil film and reflection.
Position measurement in X, Y, and angle on the conveyor or centering table.
Technology: 2DLE + BK

LEARN MORE

Part transfer and handling between presses

Partially formed blanks are transferred between press stages. Position shifts can occur during transport and unloading.
Inline measurement without production interruption, compact integration, covers both transfer and handling in one system.
Inline position correction between press strokes, guidance for part unloading and handover.
Technology: BK / Sense&Place, 2DLE

LEARN MORE

Surface inspection of pressed parts

Finished pressed parts – especially visible surfaces such as door outers, hoods, and roofs – are inspected before leaving the press shop.
100% inline inspection, detection of finest defects on mirror-like surfaces, no additional handling required.
Detection of draw marks, dents, wrinkles, and scratches on highly reflective metal surfaces.
Technology: 3D + BK / ClearSpace

LEARN MORE

Dimensional control / end-of-line

Parts are checked for dimensional accuracy before being transferred to the body shop.
Non-contact measurement, direct CAD referencing, trend analysis enables early detection of tool wear before scrap is produced.
Contactless measurement of part geometry, hole positions, and contour against CAD specification.
Technology: Inspection

LEARN MORE

Stacking / carrier loading

Finished parts are automatically loaded onto carriers for transport to the next production stage
Automated carrier loading without manual intervention, reliable part handover to downstream processes.
Detection of carrier position and guidance of the robot for accurate, position-correct stacking.
Technology: FrameSense

LEARN MORE

Back

Intralogistics

Decades of Dedication

Geometry measurement after laser cutting

Blank destacking

Optical blank centering

Part transfer and handling between presses

Surface inspection of pressed parts

Dimensional control / end-of-line

Stacking / carrier loading

Our team will be in touch as soon as possible.